Ksenia KSI1000016.300 Guide D'installation Rapide page 16

All manuals and user guides at all-guides.com
ENGLISH
In this table a Wiring Scheme is illustrated. All BUS Peripherals Ksenia (ergo Keypad, gemino BUS
GSM/GPRS Communicator, Outdoor & Indoor Sirens, etc.) are equipped with 4 terminals (identified with
the symbols +,A,B,-) which need to be connected among them in parallel with the homonymous terminals
on the CP mother board. The Detectors have to be connected on the Input terminals (ix or Mx), with
reference to the negative. In the case of a Double-Balance configuration, for the connections please refer
to the following Schema:
whereby T is the tamper contact present on the Detector and A the Alarm Relay. R1 and R2 are the two
Resistances having value of 10KOhm each and delivered together with the CP Mother-Board and the
expansion module auxi.
16