TFA 35.1158.01 Mode D'emploi page 17

TFA_No. 35.1158_Anleitung_multi 20.08.2020
ELEMENTS – Wireless weather station
12. Moon phase
• The actual moon phase is shown on the display:
A B
G H
A: New moon B+C: Waxing crescent
G: Full Moon H+I: Waning gibbous
13. Backlight
• Press the SNOOZE/LIGHT button. The backlight turns on for 5 seconds.
32
15:48 Uhr Seite 17
C D E F
I J K L
D: Half-moon (first quarter) E+F: Waxing gibbous
J: Half-moon (last quarter) K+L: Waning crescent
ELEMENTS – Wireless weather station
14. Additional outdoor transmitters
• For having more than one transmitter, select different channels for each transmitter with the 1/2/3 switch. The new trans-
mitter will be received automatically by the base station.
• The outdoor values will be shown on the display of the base station. If you have installed more than one transmitter, press
the button to change between the outdoor transmitters (1-3).
• You can also choose an alternating channel display. Press the
will appear.
• To cancel an unused channel, hold the button for 3 seconds. "- - _ - -" flashes on the display. If a new channel is
received it will be automatically registered again.
15. Positioning and mounting of the base station and the transmitter
• When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may trigger incorrect measure-
ment and continuous humidity damages the electronic components needlessly.
• Place the base station in your living room or use the suspension device to fix the instrument at the wall. Make sure to
avoid the vicinity of any source of interference such as computer screens, TV sets or solid metal objects.
• Once the desired location is chosen, check whether the transmission from the transmitter to the base station is possible
(transmission range of up to 100m in open areas). Within solid walls, especially ones with metal parts, the transmission
range can be reduced considerably.
• If necessary, choose another position for the outdoor transmitter and/or receiver.
• If the transmission is successful, you can wall mount the outdoor transmitter with the suspension device.
16. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or scouring agents. Protect it from moisture!
button. After the last registered channel, a circle symbol
33