TFA 35.1158.01 Mode D'emploi page 16

TFA_No. 35.1158_Anleitung_multi 20.08.2020
ELEMENTS – Wireless weather station
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after two minutes and it will be reac-
tivated at the same set time on the following day.
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze function is activated. The backlight turns on for a
short period.
• The alarm symbol and the snooze symbol are flashing on the display.
• The alarm will be interrupted for 5 minutes.
• Press any button to turn off the snooze function.
7.3 Display change °C/°F
• On the base station, the temperature will be displayed in °C.
• Press °C/°F button to change the temperature unit on the transmitter display from °C to °F.
7.4 Maximum/Minimum function
• Press the button to show the maximum (MAX) values of temperature and humidity of the indoor and outdoor sen-
sor and for the atmospheric pressure. Press the
• If you press and hold the button for 3 seconds, the values are deleted and reset to the actual value.
8. Trend arrows
• The trend arrows indicate whether the temperature, humidity and atmospheric pressure values are currently increasing,
steady or decreasing.
30
15:48 Uhr Seite 16
button again to show minimum (MIN) values.
ELEMENTS – Wireless weather station
9. Frost alarm
• On the display and "!" flash, when the outdoor transmitter on channel 1 shows an outdoor temperature between -3°C
and +1°C. When the outdoor temperature drops below -3°C,
• If no transmitter is connected on channel 1, the device uses the values of channel 2 or 3. If this transmitter is not situated
outside or if there is no transmitter connected, a wrong or no display will be the result.
10. Weather forecast
• The wireless weather station distinguishes 5 different weather symbols:
Sunny Partly cloudy Cloudy
• The weather forecast relates to a range of 6 to 12 hours and indicates only a general weather trend. For example, if the
current weather is cloudy and the rain symbol is displayed, it does not mean the product is faulty because it is not raining.
It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rain.
11. Developing of atmospheric pressure
• The bar graph indication of atmospheric pressure shows the last 12 hours.
and "!" remain on the display.
Rainy Heavy rain
31