GE JKS5000 Manuel Du Propriétaire page 21

Oven Door
Oven Door Removal
NOTE:
of the product but is an added convenience.
To remove the door:
go.
from front frame and set aside. The
hinge bracket must be replaced for
proper door functionality when door
is reinstalled.
3. Push both hinge locks down toward
the door frame to the
unlocked position. This
may require a flat-blade
screwdriver. DO NOT
LIFT THE DOOR BY
THE HANDLE!
4. Place hands on both
sides of the door and close the oven door to the
cm] from the closed position).
slots. NOTE:
you have a firm grip before lifting the oven door off
dents or scratches.
Hinge Clears Slot
49-2000254 Rev. 4
Position
Hinge
Slot
Hinge
Arm
Replacing the Oven Door
NOTE: The oven door is heavy. You may need help
lifting the door high enough to slide it into the hinge slots.
side.
2. With the door at the same angle as the
seat the notch of the hinge arm into the
bottom edge of the hinge slot. The notch
of the hinge arm must be
fully seated into the bottom
of the slot.
door will not fully open, the
indentation is not seated
correctly in the bottom edge
of the slot.
4. Push the hinge locks up
against the front frame of the
oven cavity, to the locked
position.
5. Replace hinge bracket
bracket must be
replaced for proper door
functionality.
6. Close the oven door.
Hinge
Arm
Edge of
Slot
Hinge in
Position
Securely Fitted
Hinge Slot