Lanaform ABPM-100 Manuel D'instructions page 8

EN
•
•
•
•
8 / 68
M-ABPM100-Lot003.indd 8 M-ABPM100-Lot003.indd 8
FR NL DE SL SV
If there is no result in the memory of the selected
user, the LCD screen displays "0" for blood pres-
sure and for the pulse measurement.
Press the memory button . A7 flashes on the
(3)
screen. The average value of morning measure-
ments of the last 7 days is displayed (morning:
5 am – 9 am).
Press the memory button . P7 flashes on the
(3)
screen. The average value of evening measure-
ments of the last 7 days is displayed (evening:
6 pm 8 pm).
If you press the memory button again
again, the latest measurement is displayed on
the screen. The irregular heartbeat symbol (if
there is one) and the symbol for ranking
(17)
the measuring results flash.
(18)
ABPM-100 EN Instruction manual
• If you press the memory button
see your individual measurements.
• To switch the device off, press the STOP/START
button .
(2)
• You can leave the menu at any time by pressing
the STOP/START button
Deleting the values measured
• To delete the records of a specific user memory,
first select a user memory.
• Hold the memory button
to delete the results.
ERROR MESSAGE/RECTIFYING ERRORS
Problem Cause
The LCD screen The cuff is in the
displays an wrong position or has
abnormal result. not been tightened
sufficiently.
The body's posture
is not correct
during the test
Arm or body move-
ment, nervousness,
excitement or the act
of talking during the
measuring process
Heart rate is irregular
(arrhythmia)
• In the event of error, an error message is displayed
on the screen Er_.
• Error messages may be displayed when:
(3)
· the systolic or diastolic pressure has not been
measured (ER1 or ER2 is displayed on the screen);
· systolic or diastolic pressure is outside the
measuring range ("Hi" or "Lo" is displayed on
the screen);
· the cuff is too tight or too loose (ER3 or ER4 is
displayed on the screen);
· blood pressure is higher than 300 mmHg (ER5 is
displayed on the screen);
· inflation takes more than 180 seconds (ER6 is
202112LA090207003 15/11/2021
again, you can
(3)
.
(2)
down for 3 seconds
(3)
Solution
Apply the cuff cor-
rectly and try again.
Re-read sections
"Adjusting to the
correct position"
in the instructions
and try again.
Take another
measurement and
follow the positioning
instructions and
instructions for use.
The blood pressure
monitor is not
suitable for people
suffering from
serious arrhythmia
15/11/2021 15:41:25 15/11/2021 15:41:25
displa
· there
(ER7 o
· the ba
Technic
If the (sys
outside th
tures" par
message
consult a d
properly. T
set by the
deactivat
values of t
nical alarm
be reset. T
off autom
MAINTE
• Clean t
a sligh
• Do not
• Never
as this
damag
• Do no
the cu
the ba
• No com
monit
lists, d
other
appro
repair
ignate
• It is re
check
contac
• The m
mance
measu
• The cu