Lanaform ABPM-100 Manuel D'instructions page 5

21
INSERTING THE BATTERIES
•
•
•
•
•
•
SET-UP DATE AND TIME
•
Time format
•
emory
•
M-ABPM100-Lot003.indd 5 M-ABPM100-Lot003.indd 5
Battery change symbol
Remove the battery compartment cover
the left-hand side of the device.
Insert four 1.5V micro batteries (LR03 alkaline
not included in the packaging).
You must insert the batteries according to the
polarity illustrated. Do not use rechargeable
batteries.
Close the battery compartment cover carefully.
If the battery change symbol
measurements can be taken and you need to
change all the batteries.
Removing the batteries
Flat and fully discharged batteries must be dis-
posed of in special containers or at collection
points intended for this purpose or returned
to an electrical appliance retailer. You have a
legal obligation to dispose of batteries properly.
This menu allows you to adjust the following
functions one after the other:
Time Date Hour format
You must adjust the date and time.
Without these adjustments, it is impossible
to register and read your measurements
accurately with the date and time.
Press and hold down the STOP/
START button and the memory
(2)
button at the same time for 3
(3)
seconds or insert the batteries.
Using the memory button , select the time
(3)
format you require and confirm by pressing the
STOP/START button .
(2)
ABPM-100 EN Instruction manual 202112LA090207003 15/11/2021
Date
• The year flashes on the screen. Using
the memory button
on year you require and confirm by
(5)
pressing the STOP/START button
• The month flashes on the screen. Using the
memory button
quire and confirm by pressing the STOP/START
button
appears, no
(21)
• The day flashes on the screen. Using the memory
button
by pressing the STOP/START button
If the time format has been adjusted
to 12 pm, the order of the day and
month displayed is reversed.
Time
• The time flashes on the screen. Using the memory
button
firm by pressing the STOP/START button
• The minutes flash on the screen. Using the
memory button
require and confirm by pressing STOP/START
• Once all the dates have been adjusted, the device
automatically switches off.
MEASURING BLOOD PRESSURE
Positioning the cuff
• Put the cuff on your bare left
arm. The circulation in your
arm must not be restricted
by clothes that are too tight
or anything else.
• Position the cuff on your
arm so that the lower edge
EN
FR NL DE SL SV
, select the
(3)
.
(2)
, select the month you re-
(3)
.
(2)
, select the day you require and confirm
(3)
(2)
, select the time you require and con-
(3)
, select the minutes you
(3)
.
.
(2)
.
(2)
5 / 68
15/11/2021 15:41:24 15/11/2021 15:41:24