Publicité
6.3.1 Presence sensor
This function allows the radiator to pick up whether or not people are in the space, and automatically regulate the heating
level, in order to optimise comfort and energy saving.
Thanks to this function, which can only be activated in Comfort mode, the radiator continuously monitors the room and, if no
people are detected, it reduces the comfort temperature set as follows:
Period
of absence
60 min
90 min
120 min
38 hours
The reduction is temperature always relates to the comfort temperature. If the radiator is in Eco or Anti -freeze mode, no
change in temperature to be maintained in the room will be observed.
Should someone be detected in the room for at least 10 consecutive minutes, the temperature is automatically returned to
the comfort temperature set, without any reduction. The same happens if, while the temperature required is being reduced,
due to an absence of people being detected in the room, the "M" key is pushed.
Important:
Correct operation of this function may depend on where the radiator is positioned in the room. To choose the best
installation position, bear in mind that the sensor detects movements within the area indicated in figure 9, and that no
objects must be in its way. Presence detection is also more effective when people move in front of the sensor that when
they move towards it.
Reduction of the Comfort
temperature
1,0°C
2,0°C
3,5°C
Anti-freeze activated 7±3°C
31
Indication
on the display
The presence sensor and comfort mode
symbols flash together
((
))
Publicité
