Publicité
Having modified the temperature for each
of the 23 hours of Day 1, press further "+"
button to enter the modification mode of
Day 2.
Once the last day (Day 7) has been set,
press "+" button to end the program
sequence.
"OK will appear on the display for 5
second, confirming that the Program
sequence
has
been
successfully.
System is now set to adjust the
temperature according to the new
adjustment of program P1.
N.B.:
-
You can abort the display/modification sequence anytime, deleting any settings that have not been saved, just by
pressing "Stand-By" button;
-
Restoring the default settings will delete every P1 Program previously created (see paragraph 6.3);
-
If no button is pressed within 90 sec. during the Program setting process, the result will be the cancellation of the
display/modification procedure and will restore back the factory default settings;
-
During the programming process, the heating elements will automatically switch to Stand-by mode, and the radiator
does not heat.
EXAMPLE: HOW TO SET A CUSTOM PROGRAM
Let's see how to program a brand-new radiator and anticipate the change from ECO to COMFORT temperature one hour
earlier (06:00 a.m. is the default factory settings), for each day from Monday to Friday.
Press "M" to select Program P1
carried
out
Press "+" button to diplay/modify the
working temperature of each hour of Day
2, as descrive for Day 1.
You can set automatically the same
program of Day 1 on Day 2 by holding
the "F" button and pressing "+" button.
Note: you are allowed to copy and paste
the same daily program ONLY WHEN
the number of the day you wish to adjust
is displayed (as showed in the picture),
BUT NOT when the hour is displayed.
END will appear on the display. A further
pression of "+" button will allow you to
confirm the adjusted program.
Note: it is possible to exit any time from
the
displaying every hour until Day 7.
To do so, just hold "F" button and press "-
" button.
27
program
sequence,
without
Publicité
