Publicité
6.2.2 Switching the radiator on and off
The power supply to the radiator is controlled by a two-pole electromechanical switch (G) located on the right side of the
radiator. When this switch is used the power supply to the electronic board is also switched off and, as a result, all the
parameters saved are lost after about 30 minutes, and the default settings are reinstated.
We recommend only using this switch if the radiator is not to be used for a long period of time, and to rather use the Switch
on / Stand by button (A) for switching off for short periods, in order to avoid losing the settings saved.
When the radiator is switched on using
the main switch on its side, the display
lights up and the stand-by symbol is
displayed.
To switch on the radiator, push the
Switch on / Stand-by key.
To switch off the radiator, hold down the
Switch on / Stand-by key for at least 3
seconds.
6.2.3 Selecting the operating mode
Pressing the "M" key repeatedly allows
you to select the operating mode you
require.
Icon
Description
Comfort
Eco
Anti-freeze
Programme P1
When used
When at home the radiator works to maintain the comfort temperature set.
When you are away from home for short periods (from 2 to 48 hours) or you
are sleeping. The radiator works to maintain the eco temperature set and
save energy.
When you are away from home for long periods (more than 48 hours). The
temperature is automatically set at 7±3°C and cannot be changed.
When you want preset programmed operation, suitable for those that do not
work from home. THIS PROGRAM CAN ALSO BE CUSTOMIZED
FOLLOWING THE INSTRUCTIONS LISTED IN PARAGRAPH 6.2.6.
23
The radiator always comes on in comfort
mode. If the radiator is new or the power
supply has been off for more than 30
minutes, the comfort temperature is at
the default value of 19°C.
Switching the radiator off using the
rocking switch on its side for more than
30 minutes results in the loss of all data
saved (date, time, temperature setting,
etc.).
The operating modes are activated in the
following order:
→
→
→
→
Once 30" has elapsed since the "M" key
was last pushed, the operating mode
activation sequence begins from the
beginning again, to make it quicker to
switch from any mode to Comfort mode.
→
→
Publicité
