Charging Process - Trek FAZUA Manuel Du Propriétaire

31.5.1 Connect battery to the charger
1. Insert the charging plug into the charging socket on the battery. Since
the charging plug is magnetically coded, it can only be plugged in in the
intended position.
2. Plug the power plug into a suitable wall outlet to establish the power
connection.
The charging process starts automatically after connection to the
mains.
31.5.2 Ending the charging process
1. Then disconnect the charger from the power supply by removing the
mains plug from the socket.
2. Disconnect the charger from the battery by removing the charger plug
from the charging socket on the battery.
3. Replace the drivepack with the battery correctly on the e-bike.

31.6 Charging process

Charging begins as soon as you have connected the charger's charger plug
to the charger socket on the battery and the charger to the power supply.
The flashing LEDs on the battery charge indicator indicate that the battery
is being charged.
| evation
3
E.3
- 83 -
EN-73