Suntec Wellness KLIMATRONIC EFFECT 7.0 Eco R290 Mode D'emploi page 18

3. Unit is too loud.
4. E1 Code
5. E2 Code
6. Compressor does
not start
Spare parts and accessories supply (fast convenient supply)
You can obtain spare parts and accessories for your EFFECT unit from your local dealer. And at our
website
you will find further information on individual accessory products as well as information on obtaining
our spare parts quickly and conveniently. You will also find other information (e.g. FAQ, lists of spare
parts, document download, etc) on your EFFECT unit.
Set temperature is too high.
Air inlet is blocked.
The ground is not even and flat enough
The sound comes from the flowing of
the refrigerant inside the unit.
Room temperature sensor is not
functioning.
The coil sensor doesn't work.
Thermal protection function is activated.
www.suntec-wellness.de
Reset the temperature.
Clean the air inlet
Place the unit on an even and flat surface.
None, this sound is normal.
Let the sensor be replaced.
Let the sensor be replaced.
Please turn off the device and restart it 3
minutes later.