Suntec Wellness KLIMATRONIC EFFECT 7.0 Eco R290 Mode D'emploi page 16

1. POWER: Press the button to turn the unit on or off.
2. MODE: Press the Mode button after starting the unit to select between cooling, dehumidifying or fan
mode.
3. FAN: Press the Fan button after starting the unit and adjust the desired fan speed.
4. TEMPERATURE UP / TEMPERATURE DOWN: Switch the unit into the cooling mode and use these
buttons to adjust desired room temperature (16-32°C).
Remote control
1. Power
2. Timer
3. Temperature / Timer up / down
4. Mode
5. Fan Mode
6. Swing
7. Display lighting
Functions
Cooling mode
•
Press the MODE button to set the cooling mode, the cooling mode indicator lights.
•
Press the + (up) or – (down) to adjust to the temperature (16°C – 32°C).
•
Press the FAN button to adjust the fan speed (high or low).
Fan mode
•
Press MODE button to turn on the fan mode, the fan mode indicator lights.
•
Press the FAN button to adjust the fan speed (high or low).
•
Temperature setting cannot be made.
Timer
•
In standby mode, press the TIMER button to set the on-time. The timer indicator lights up.
•
After starting the unit press the TIMER button to set the off-time. The timer indicator goes off.
•
Please press the up/down button to set the desired duration.
Dehumidifying mode
•
Press the MODE button to set the dehumidification mode, the dehumidification mode indicator will light.
•
Temperature setting cannot be made.
•
At temperatures below 25°C the fan speed automatically remains low.
Swingfunction:
•
Using the SWING button, you can conveniently let the slats swing automatically in front of the air outlet
to distribute the cooled air evenly throughout the room.