Numark PARTY MIX LIVE Guide D'utilisation page 3

Features
Top Panel
1. Browse Knob: Rotate this knob to cycle through crates and tracks. Press it to move
forward in the software panels.
2. Load: Press one of these buttons while a track is selected to assign it to Deck 1 or 2,
respectively, in the software.
3. Main Gain: Adjusts the overall volume in the software and the internal speakers.
4. Cue Gain: Adjusts the volume for headphone cueing in the software.
5. Level: Adjusts the pre-fader, pre-EQ audio level of the corresponding channel in the
software.
6. High EQ: Controls the treble frequencies for the individual channels.
7. Low EQ: Controls the bass frequencies for the individual channels.
8. Filter: Adjusts the amount of the filter effect. Turning the knob left and right will produce a
low-pass filter and high-pass filter, respectively.
9. Channel Volume: Adjusts the volume of the individual channels in the software.
10. Crossfader: Controls the blend between the two decks.
11. PFL/Cue: Press this button to send this channel's pre-fader signal to the Cue Channel for
monitoring. When engaged, the button will be lit. By pressing one PFL button at a time,
you will cue that channel alone (and deactivate PFL monitoring for the other channels). To
cue to multiple channels simultaneously, press the PFL buttons for those channels at the
same time.
3