Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
10. Maintenance, Inspection, Repair
Only authorised and qualified personnel may do any work on the
control and regulating component.
Maintenance
If operated correctly in accordance with the installation instructions
and ambient conditions, it does not require maintenance.
Inspection
Under EN/IEC 60079-17 and EN/IEC 60079-19 the owner /
managing operator of electric installations in hazardous areas is
obliged to have these installations checked by a qualified electrician
to ensure that they are in a proper condition.
Repair
Repairs to explosion-protected equipment may only be carried out by
the manufacturer or by persons commissioned by the manufacturer
for this purpose and trained to do so. Please contact BARTEC
GmbH if you have any questions.
11. Disposal
The components for the supply modules contain metal, plastic parts
and electronic components.
Our devices are intended as professional electronic equipment
exclusively for commercial use. They are classed as B2B
devices under the WEEE Directive. The WEEE Directive
provides the framework for the applicable treatment of waste
electronics throughout the EU. This means that you are not
permitted to dispose of these products with other household
waste. You must ensure environmentally sound disposal in a
separate collection. Also it is not allowed to place the
equipment in the collection points operated by public waste
disposal authorities.
Our customers can return all products procured from our
company to us for disposal. We ensure disposal in accordance
with valid statutory provisions.
The costs for postage and packaging are borne by the sender.
The statutory requirements relating to electrical and electronic
waste must be complied with during disposal, for example
disposal by an approved authorised treatment facility.
BARTEC GmbH
Max-Eyth-Straße 16
EN
97980 Bad Mergentheim
Germany
Control units MODEX
(Translation)
Isolator terminal IP30, type 07-7331-6131/EE00
Phone: +49 7931 597-0
Fax: +49 7931 597-119
12. Order Number
Isolator terminal IP 30
13. Changes to the Document
BARTEC GmbH reserves the right to change the contents of this
document without notification. We assume no guarantee for the
correctness of the information. In cases of doubt the German safety
instructions apply because it is not possible to rule out errors during
printing and translation. The "General Terms and Conditions of
Business" of the BARTEC Group moreover apply in the event of
legal disputes.
The current version of data sheets, operating instructions, certificates
and EC declarations of conformity can be downloaded from
www.bartec-group.com
>>> "Products"
>>> "Automation & Enterprise Mobility"
>>> "Bus Technology"
or can be requested directly from BARTEC GmbH.
14. Service Address
BARTEC GmbH
Max-Eyth-Straße 16
97980 Bad Mergentheim
GERMANY
Phone
+49 7931 597-0
Fax
+49 7931 597-119
E-Mail:
info@bartec.de
www.bartec-group.com
Internet:
info@bartec.de
Reservation Technical data subject to change without notice.
www.bartec-group.com
07-7311-6131/EE00
under
Changes, errors and misprints may not be used
as a basis for any claim for damages.
5/6
Publicité
