Parkside PTPS 1100 A1 Traduction Des Instructions D'origine page 19

Overview
1 Handle
2 Float switch height adjustment
3 Float switch
4 Mains connection cable
5 Foot part
6 Pump outlet
7 Pump housing
8 Quick-connect adapter
9 Angle adapter with quick-con-
nect connector
10 Reducer
11 8 m nylon cord
12 Float switch cable
13 Lever, float switch
height adjustment
Technical Data
Dirt Water
Submersible Pump .............. PTPS 1100 A1
Rated voltage ..................230 V~, 50 Hz
Rated power input/
Power consumption ................... 1100 W
Max. discharge rate (Q max) .. 20000 l/h
Max. discharge head (H max) ........... 9 m
Max. depth of immersion .................. 7 m
Max. water temperature (T max) ..... 35 °C
Hose connection .............. 1", 1¼ ", 1½ "
Max. foreign body size .................35 mm
Switching point level:
ON ...........................approx. 520 mm
OFF ...........................approx. 230 mm
Minimum water level
while suctioningn ............................9 cm
Mains cable .................................. 10 m
Weight (incl. accessories) ............ 5.65 kg
Safety class .......................................... I
Degree of protection .........................IPX8
The maximum performance is measured
with a straight, direct outlet flow. The angle
piece and backflow valve may reduce per-
formance.
Performance data
Notes on Safety
This section deals with the general
safety regulations for working with
the equipment.
Symbols in the manual
Warning symbols with
information on damage
and injury prevention.
Instruction symbols with infor-
mation on preventing dam-
age.
Pull out the mains plug.
Help symbols with informa-
tion on improving tool han-
dling.
Symbols on the equipment
Caution! Not suitable for wa-
ter with a high sand content!
GB IE
(l/h)
19