Abus FU8370 Mode D'emploi page 21

4. Open the housing. The detector now sends a tamper
signal to the alarm centre.
Idle time
The default idle time of the detector is set to one minute.
This function works as follows:
1. The detector recognises a noise and sends a signal to
the centre. The idle time now begins. The LED flashes
once per second in this time.
2. When the idle time has expired, the detector can then
detect the next noise and send a signal to the centre.
This product complies with the requirements of the EU
directive: 1995/5/EC "Directive on radio and
telecommunications terminal equipment and the mutual
recognition of their conformity".
The declaration of conformity can be ordered from:
ABUS Security-Center GmbH & Co. KG
86444 Affing
GERMANY
www.abus-sc.eu
info@abus-sc.eu
21