Eureka NEN110 Serie Guide Du Propriétaire page 9

How to maintain your vacuum cleaner
Cleaning the Filter
The lter is an effective system for removing dust.
Sponge lters require cleaning on a monthly basis (or more depending on use frequency).
1. To remove the lter, pull on the dust cup lid clip and lift the cover upwards.
2. The lter is located inside the top cover of the dust
cup.
Pull on the handle of the lter housing then remove it.
3. Tap the lter over a bin to remove the dust.
4. Take the sponge lter out of the lter
housing.
5.
DO NOT USE DETERGENTS to clean any part.
Leave it out to dry for 24 hours or until fully dry before placing it back in the vacuum cleaner.
6. Put the lter back into the housing. Put the housing and lter back into the dust cup lid.
Finally, close the dust cup lid.
7. Place the dust cup back into the vacuum cleaner until a click is heard.
Filter frame handle
Filter
Cyclone separation
system
9