• Store your cleaner indoors in a
cool, dry area.
• Keep your work area well lit.
• Unplug electrical appliances
before vacuuming them.
• Belt pulleys can become hot
during normal use. To prevent
burns, avoid touching the belt
pulley when servicing the drive
belt.
•
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service
agent or similarly quali ed
persons in order to avoid a
hazard.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider then the other). This
plug will t in a polarized outlet only one way. If the plug does not fully t into the outlet, reverse the plug.
If it still does not t, contact a quali ed electrician to install the proper outlet. Do NOT change the plug in any way.
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the
cleaner suddenly shuts off, push the on/off switch off (0) and unplug the cleaner. Check the cleaner for a
possible source of overheating such as a full dust cup, a blocked hose or clogged lter. If these conditions are
plug the cleaner back in and push the on/off switch on (I).
Do Not Oil the motor or the brushroll at any time. The bearings are permanently
lubricated and sealed.
4
SAVE THESE INSTRUCTIONS
• Turn off the power switch and
unplug cleaner before rotating
the nozzle.
•
This appliance can be used
by children aged from 8
years and above and per-
sons with reduced physical,
sensory or mental capabili-
ties or lack of experience
and knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the appli-
ance. Cleaning and user
maintenance shall not be
made by children without
supervision.