IARP EIS 112 HP Instructions Pour L'utilisateur page 15

Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
Max
49 Kg
4. TRANSPORTATION
The display cabinet is contained in a specially crated package that enables
transportation by the use of fork-lift trucks. For each subsequent handling of the
cabinet, the use of the wooden platform is recommended.
The unit is shipped anchored onto a wooden base and protected by corner posts,
cardboard top and nylon wrapping.
It must only be handled using a fork lift truck with adequate power to the load.
Positioning the appliance horizontally or on its side or upside down is to be strictly
avoided.
Handling is reserved to the authorised after-sales service.
The equipment MUST be kept vertical.
5. STORAGE AND DISMANTLING
WARNING! Use protective gloves during unpacking and installation
operations.
During unloading and movement operations, avoid tilting the machine and avoid sudden manoeuvres.
The unit is shipped anchored onto a wooden base and protected by corner posts, cardboard top
and nylon wrapping. Keep all packaging away from children. For each subsequent handling of the
cabinet, the use of the wooden platform is recommended. Carefully remove the packaging, taking
care not to damage the components and not to throw away those that will be needed for assembly.
Keep all packaging away from children.
ATTENTION! After unpacking, check that the appliance has not suffered
damage during transportation.
WARNING! To remove the wooden base, only use the hydraulic jack
(shown on the side).
WARNING! Do not use forks (pallet trucks) to remove the wooden base.
To unpack the bench proceed as follows:
1. Unscrew the screws and remove the wooden cage.
2. Remove the plastic cover.
3. Unscrew the screws from the wooden base.
4. Using the hydraulic jack.
5. Remove the wooden base.
6. Position the bench adjusting the feet.
EIS 112 HP
EIS 162 HP
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
Attention! It is strictly necessary to comply with the max loads indicated
(Kg) for each shelf to avoid deformation or breakage.
1 5 / 5 6
PAGE
UM000601
N° DOC