IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the
Chef'sChoice
3. Make sure that only clean knife blades are inserted in Model D202.
4. Disconnect the appliance from its power source when not in use,
before cleaning, during service and when replacing parts.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner.
U.S. customers: You can return your sharpener to The Legacy
Companies' factory for service where the cost of repair or
electrical or mechanical adjustment can be estimated. When the
electrical cord on this appliance is damaged, it must be replaced
by the Chef'sChoice
the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local
distributor where the cost of repair or electrical or mechanical
adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed
by the manufacturer because special tools are required. Please
consult your Chef'sChoice
7. CAUTION! This appliance may be fitted with a polarized power
plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the
plug in anyway.
8. Carefully route the power supply cord to avoid damage from the
knife blades while sharpening.
®
sharpener in water or other liquid.
®
factory or other qualified service to avoid
®
distributor.
English — 2