DeWalt DCS312N Traduction De La Notice D'instructions Originale page 26

EngLIsh
RECIPROCATING SABRE SAW
DCS312
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No-load speed
Stroke length
Cutting capacity in wood/metal profiles/plastic tubes
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
While cutting board
Vibration emission value ah,
B
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
24
WALT one of the
e
V
DC
min -1
mm
mm
kg
dB(A)
dB(A)
dB(A)
= m/s 2
m/s
2
EC-Declaration of Conformity
Machinery Directive
Reciprocating Sabre Saw
DCS312
DCS312
12
D WALT declares that these products described under
e
1
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2014+AC:2015 + A11:2022, EN62841-2-
Li-Ion
11:2016+A1:2020.
0–2800
These products also comply with Directive 2014/30/EU and
16
2011/65/EU. For more information, please contact D
90/40/90
the following address or refer to the back of the manual.
1.38
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
87
95
Markus Rompel
3
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
5.7
09.03.2022
1.6
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
D WALT declares that these products described under
e
Technical Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2014+AC:2015 + A11:2022, EN62841-2-
11:2016+A1:2020.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
REGULATIONS 2008
Reciprocating Sabre Saw
DCS312
WALT at
e
WALT.
e