Publicité
Les langues disponibles
Les langues disponibles
4. PRESENTATION.
4.1. VIEWS OF THE EQUIPMENT.
Fig. 1. Front and rear view of the equipment.
4.2. LEGENDS CORRESPONDING TO THE
VIEWS.
Input multi-function ON/OFF
switch for 2 seconds to turn the UPS on or off.
Status mode
ˆ
ours depending on the status of the equipment. (see Tab. 2).
Mute
setting: The audible alarm can be turned OFF or ON
ˆ
by pressing the power button twice repeatedly, either in
normal operation or on battery power. The default setting
is for Alarm On.
Schuko sockets with autonomy and overvoltage pro-
tection: They guarantee power supply to connected equip-
ment during back-up time in case of power failure.
IEC input
socket: Connect the UPS to the mains via the cable
supplied.
USB-HID
port: This port allows connection and communica-
tion from the USB port of the computer to the UPS unit.
EPO port
(option): Enables emergency shutdown of the UPS
from a remote location. With the EPO terminal open, the UPS
will shut down and the output will disconnect immediately (see
section 5.3.2.).
Resettable incoming circuit breaker
protection.
USER MANUAL
switch: Press the power
indicator: the switch will light up in different col-
protection: overload
4.3. NOMENCLATURE.
SPS 900 NODE
4.4. DESCRIPTION.
The
SPS NODE
adaptable to single-user environments.
With the attractive appearance of a rack unit, it has eight output
sockets, capable of supplying a more or less extensive back-up
time depending on the level of load connected to the output. All
outlets are equipped with surge protection.
The main function of the UPS is to supply the equipment connected
to the output sockets for a limited period of time in the event of a
mains failure, using the internal battery it incorporates.
Off-Line UPSs do the latter, covering mains failures by supplying a
similar voltage for a period of time.
Under normal conditions, the UPS output is the same as the AC
mains input. A real-time detection circuit detects mains outages,
switching to battery quickly, allowing the system to keep loads
powered with a modified sine wave.
Serie NODE.
Power (VA).
Product acronyms -Standby Power Supply-.
series UPS is an Off-Line UPS designed to be fully
SPS NODE UNINTERRUPTIBLE POWER SUPPLIES (UPS)
23
Publicité
