Battipav EXPERT Mode D'emploi page 43

Battipav srl
The EXPERT site cutter is a machine intended specifically for cutting bricks, natural stone, granite, concrete items and similar
materials, up to a thickness of 285 mm. The machine uses a wet diamond tipped tool cutting system and is intended for personnel
specialized in the construction sector. The operator works in front of the moving worktop, within reach of the operating controls,
and positions the material to be cut on the moving worktop. He/she moves the moving worktop forwards to bring the material
into contact with the tool.
RECOMMENDED USE
CUTTING TOOL DIAMOND BLADE WET CUTTING
LASER/SECTORS: cement, natural stones, granite, abrasive materials (With narrow slots, max 5 mm).
THE TOOL / MATERIAL TO BE CUT MATCHES ARE PURELY INDICATIVE. ALWAYS FOLLOW THE INTENDED USE INDICATIONS
PROVIDED BY THE CUTTING TOOL MANUFACTURER BEFORE ANY APPLICATION.
Admissible working conditions: INTERMITTENT - S6 SERVICE 40%
SYMBOLS AND SIGNS:
Danger/prohibition stickers are applied to the machine where necessary. Look at these prior to using the machine.
42
A1 Use of prescribed PPE obligatory (Safety eyewear and earmuffs)
A2 Read operating instructions before each use.
A3 Use of prescribed PPE obligatory ( Protective Gloves )
A4 Warning! Danger of accidental contact
A5 Do not use discs for wood or metal
MANUFACTURER AND MACHINE
The nameplate shown is fitted directly on the machine. It indicates all the references and information necessary
for safe operation.
41
A Machine model
B Item
C Serial number
D Power supply voltage
E Power supply frequency
F Current absorption
G Installed power rating
H Tool rotation speed
I Class of protection
L Starter capacitor
INSTALLATION
TRANSPORT
The EXPERT machine can be easily moved by using the transport handles.
Before transporting the machine, ensure that:
• The sliding carriage is fixed by locking the carriage;
• The motor head is completely down by the lever to recovery;
1
• The legs are in transport position
IN ORDER NOT TO COMPROMISE THE MACHINE STABILITY, KEEP STRICTLY TO THE FOLLOWING PROCEDURES.
HOLD THE MACHINE DURING THE WHEEL KIT INSTALLATION OPERATIONS.
1
To carry the machine to use a tie rod with four arms, capable of lifting 200 kg or at least 20% more than the weight of the
machine, engaging the hooks into the carrying handles.
HANDLING
By using the "transport wheels" accessory, the machine can be moved in the yard. When the machine is in working position:
IN ORDER NOT TO COMPROMISE THE MACHINE STABILITY, KEEP STRICTLY TO THE FOLLOWING PROCEDURES.
HOLD THE MACHINE DURING THE WHEEL KIT INSTALLATION OPERATIONS.
40%
60%
Under load running
Repose
B1 Do not wash with water under pressure
C1 Recovery tank water level
D1 Warning! Secure the carriage
E1 Change direction of rotation
F1 Laser Accessory / Instructions
M IP Level
N Year of manufacture
O Max tool diameter
P Internal tool diameter
Q Accessories
R Accessories
S Manufacturer's name
T Manufacturer's name and address
U Certification Marks
GB
43