Publicité
Les langues disponibles
Les langues disponibles
Then release the
MEASURE button
.
5
The measured value
appears on the display
and the end of the
measuring process is indicated by a short beep
(when the key tone is activated). When the measure-
ment type symbol stops flashing, the next measure-
ment can be taken. This takes approx. 5 seconds.
If the measured value lies within the normal range
(< 38 °C (100.4 °F)), the LED above the display
lights up green for 3 seconds. If the measured
value is higher than this (≥ 38 °C (100.4°F =
fever)), the LED will light up red.
If you have activated Bluetooth
data transfer, the
®
data will be transferred after the measurement.
The thermometer displays the symbol for Bluetooth
®
during transfer.
Note: The "HealthForYou" app must be activated
for transfer to occur. If the current data is not dis-
played on your smartphone, repeat the transfer
process as described in the chapter "transferring
measured values".
The device will switch off automatically after 30
seconds (if no Bluetooth
connection is available)
®
or press the ON / OFF / MEASURE button
8
for 5 seconds to switch it off.
Clean the device after every use as described in
the chapter "Cleaning and care".
26 GB/IE/NI
Publicité
