Publicité
Les langues disponibles
Les langues disponibles
on the display and the end of measurement is in-
dicated with a short beep (when the key tone is
activated). When the measurement type symbol
stops flashing, the next measurement can be taken.
This takes approx. 5 seconds.
To leave object temperature mode, hold down the
M button
and the S button
at the same time
7
6
for 3 seconds or switch the device off using the
ON / OFF / MEASURE button
.
8
If you have activated Bluetooth
data transfer, the
®
data will be transferred after the measurement. The
thermometer displays the symbol for Bluetooth
®
during transfer.
Note: The "HealthForYou" app must be activated
for the transfer to occur. If the current data is not
displayed on your smartphone, repeat the transfer
process as described in the chapter "Transferring
measured values".
The device will switch off automatically after 30
seconds (if no Bluetooth
connection is available)
®
or press the ON / OFF / MEASURE button
8
for 5 seconds to switch it off. By switching off the
device, you also leave "Measuring object temper-
atures" mode.
Please note that the displayed temperature is the
temperature which has been determined and is not
the adjusted surface temperature. It cannot be
compared with the forehead / ear temperature.
GB/IE/NI
31
Publicité
