Publicité
Les langues disponibles
Les langues disponibles
monoSTICK 165i
TECHNICAL INFORMATION
1.1 General Information
monoSTICK 165i is an inverter type portable, mono-phase DC MMA welding machine designed to weld stick
electrodes up to 3.25 mm. This unit can also be used as a DC TIG power source for touch-start applications.
Even though the machine is mono-phase, due to the inverter technology it provides stable arc and good
restriking performance, also the electric consumption is approximately %10 less than the silicon controlled
rectifier equipments and %25 less than the magnetically controlled equipments. monoSTICK 165i proved
well that it can work between 185 to 250 V 50/60 Hz line voltages. Therefore this machine is quite immune
to mains voltage fluctuations and perfectly welds with generator-sets. monoSTICK 165i can also be used
with long welding cables up to 25 mt. The machine is fan cooled and thermally protected against over
heating.
1.2 Machine Components
1
2
3
4
1- Handle
2- Thermic / Error Led
3- Current Adjustment Pot
4- Earth Cable and Welding Cable (-) 8- Power Switch
www.magmaweld.com
5
7
6
5- Power Led
Figure 1: monoSTICK 165i
6- Earth Cable and Welding Cable (+)
7- Line Cable Inlet
Technical Information
11
8
USER MANUAL
EN
Publicité
