Publicité
Les langues disponibles
Les langues disponibles
Introduction................................................................... 20
Safety............................................................................21
Assembly...................................................................... 28
Operation...................................................................... 29
Maintenance................................................................. 34
Intended use
This chainsaw for forest service is designed for forest
work such as felling, limbing and cutting.
Note:
National regulations can set limit to the
operation of the product.
Product overview
(Fig. 1)
1. Front hand guard
2. Front handle
3. User interface
4. Start/stop button
5. Warning indicator and battery indicator
6. SavE button
7. Rear handle with right hand guard
8. Information and warning decal
9. Housing
10. Chain oil tank
11. Transportation cover
12. Power trigger lockout
13. Power trigger
14. Drive sprocket cover with bar knob
15. Chain tensioner
16. Chain catcher
17. Spiked bumper
18. Bar tip sprocket
19. Saw chain
20. Guide bar
21. Indicator for state of charge
22. Connector
23. Battery charger
24. Combination wrench
25. Warning indicator
26. Button, battery status
27. Battery status
28. Battery release button
29. Battery
30. Operator's manual
31. Bar knob
32. Drive sprocket cover with bar bolt
20
Contents
Troubleshooting............................................................ 39
Transportation, storage and disposal........................... 40
Technical data.............................................................. 41
Accessories.................................................................. 42
Declaration of Conformity............................................. 44
Introduction
Product description
Husqvarna 225i is a chainsaw model with an electrical
motor.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Symbols on the product
(Fig. 2)
WARNING: This product can be
dangerous and cause serious injury or
death to the operator or others. Be careful
and use the product correctly.
(Fig. 3)
Read the operator's manual carefully
and make sure that you understand the
instructions before you use the product.
(Fig. 4)
Use approved protective helmet, hearing
protection and eye protection.
(Fig. 5)
Use 2 hands when you operate the
product.
(Fig. 6)
Do not operate the product with 1 hand
only.
(Fig. 7)
Do not let the guide bar tip touch an
object.
(Fig. 8)
Do not use in rain.
(Fig. 9)
Warning! Kickback can occur when the
guide bar tip touches an object. This
causes the guide bar to be thrown in the
direction of the operator. Risk of serious
injury or death.
(Fig. 10)
Rated voltage, V
(Fig. 11)
Chain oil.
1860 - 007 - 09.01.2024
Publicité
