MIG-160ERS
MANUFACTURER WARRANTY
1. MANDATORY WARRANTY
IPO Technik-Handels GmbH grants a warranty to all customers for all welding machines and/or plasma
cutters purchased directly from IPO Technik-Handels GmbH of the IPOTOOLS brand.
All devices are subject to a 2-year statutory warranty from the invoice date under the warranty conditions
below and if it is not due to incorrect or careless handling by the customer.
Warranty Conditions
The warranty and service are valid only with the invoice.
1.1. Guarantor
The guarantor is the company:
IPO Technik-Handels GmbH
Otto-Lilienthal-Str. 4
88046 Friedrichshafen
Germany
Email: info@ipotools.eu
Website: www.ipotools.eu
The guarantee has to be claimed against the guarantor.
1.2. Personal Scope of Application
The guarantee applies equally to entrepreneurs and consumers
1.3. Territorial Scope
The guarantee is valid in the area of the EU member states.
2. ADDITIONAL MANUFACTURER WARRANTY
For equipment delivered on or after April 29th, 2021, in addition to the statutory claims for defects under
the German Civil Code (BGB), a 7-year durability guarantee as defined in § 443 of the German Civil
Code (BGB) applies in accordance with the warranty conditions below. For devices that have been
delivered by IPO Technik-Handels GmbH until 29.04.2021, the previous warranty of 2 years applies.
After 2 years, you still get the 5-year guarantee, which relates to the components defined under point 2
"Technical Scope".
The warranty refers to components which are inside the device, especially the circuit board and the
inverter. It does not include the housing, the components of the housing as well as connections, ground
cables and hose packages. It also does not cover the accessories and wearing parts supplied.
2.1. Material Scope of Application
The seven-year warranty applies only to electronic welding machines and plasma cutters of the
IPOTOOLS brand, which were delivered by IPO Technik-Handels GmbH on or after April 29th, 2021.
The warranty does not apply to equipment sold as B-goods or used equipment.
2.2. Technical Scope
16