Panasonic CQ-R925EUC Manuel D'utilisation page 7

Attenuator
e Press ATT. Volume will decrease to about 1/10 of its previous level.
e Press ATT again to deactivate when listening at normal volume.
ATT]
Changing Audio Modes
Press SEL to switch the audio mode in the following order.
VOLUME =æ BASS æ TREBLE
t y
FADER <= BALANCE
Bass and Treble
e Press SEL to select the BASS (TREBLE) mode. Press "/\" or 4" to
increase or decrease the bass/treble response.
| | |
—12 to 12 —12 to 12
e Press ""\" or "NV" for more than a half second to change numeric
levels on the display rapidly.
Balance
e Press SEL to select the BALANCE mode. Press ""\" or 4" to shift
the sound volume to the right or left speakers.
FAL ONT
TT im
HHI HG
ré EN |
Qr L 1to 15 Balance Center
è Press "/N or "SW" for more than a half second to change numeric
levels on the display rapidly.
Fader
e Press SEL to select the FADER mode. Press ""\' or "N to shift the
sound volume to the front or rear speakers.
L Hi nT
U Lowa
|
Balance Center
e Press "/N or AV" for more than a half second to change numeric
levels on the display rapidly.
Note: When a control mode (BAS/TRE/BAL/FAD) is selected but no operation is made within 5 seconds
(2 seconds at volume mode), the display will return to the normal operation (Radio, Cassette, etc) mode.
In such a case, press SEL again to select the next control mode.
CQ-R925EUC