Panasonic CQ-R925EUC Manuel D'utilisation page 11

Preset Station Setting
Up = S stations can = preset n ga T as follows;
Tavis | Sein | Eamon | Sasi :
Manual Station Preset
© Select a desired band.
(2) Use manual or seek tuning to find a station that you want to program
into memory.
@) Press and hold one of the station selector buttons 1 through 6 until
the display blinks. The memory is now Set for that button on the pane
you have selected.
Repeat the PO to set other stations for the FM1 to AM bands.
BUTTON NUMBER
Note: You can change the memory setting by repeating the above pro-
cedure.
Auto Station Preset
Select a band and press APM.
e The 6 strongest available stations will be automatically set in memory
on preset buttons 1 through 6.
e Once set, the preset stations are sequentially scanned for 5 seconds.
e Press the appropriate preset button for the station you want to hear.
MONO/LOCAL Selection
e Much interference is reduced during a weak FM stereo broadcasts
when MONO is ON.{Only for FM mode)
e Searching stops automatically at a strong wave station only when
LOCAL is ON.
Press MONO to switch on or off the MONO mode as follows.
MONO OFF == MONO ON
Press LOC to switch on or off the LOC mode as follows.
LOCAL OFF = LOCAL ON
LOCAL
CAUTION: For safety reasons, do not attempt to program while driving.
CQ-R925EUC LL