Panasonic CQ-R925EUC Manuel D'utilisation page 23

To remove the trim plate (for Japanese Cars)
You may not be able to install this unit in some makes of
Japanese cars. In such a case, consult your dealer or pro-
fessional installer.
To mount this unit on a Japanese car, first cut the 9 slits in
back of the trim plate with side-cut pliers, remove the trim
plate, then mount this unit.
If you find a trim plate necessary after mounting the unit
inside, use the supplied trim plate (©).
To Remove the Unit
a} Remove the removable face plate. (See this page.)
b} Pull out the unit while pushing the lock lever using Dismounting Plate @ .
c) Remove the unit pulling with both hands.
Lock Lever
Note: Do not lose the Dismounting Plate. !t will be needed to remove the unit from the cars dashboard.
Anti-Theft System
This unit is equipped with a removable face plate. By removing this face plate, the radio becomes totally inop-
erable. The security indicator will blink.
To Remove the Removable Face
Plate
(D Switch off the power.
@ Press the release button (4 ).
The removable face plate will be released.
A "eet E - q
E
aaa
CQ-R925EUC 29