Publicité
Les langues disponibles
Les langues disponibles
Specifications
GENERAL
7
|
: 12 V DC (11 V - 16 V) Test Voltage 14.4 V, Negative ground
: 35 W x 4 channels at 400 Hz, Volume Control maximum
: Bass
; + 12 dB at 100 Hz
Power Supply
- Maximum Power Output
Tone Action
Current Consumption
Speaker Impedance
Dimensions (W x H x D)
Weight
AM RADIO
Frequency Range
Useable Sensitivity
FM STEREO RADIO
Frequency Range
Useable Sensitivity
50 dB Quieting Sensitivity
Frequency Response
Capture Ratio
Alternate Channel Selectivity
Stereo Separation
Image Response Ratio
IF Response Ratio
Signal/Noise Ratio
TAPE PLAYER
Reproduction System
Tape Speed
FF/REW Time
Frequency Response
Wow and Flutter
Signal/Noise Ratio
: 530 - 1,710 kHz
: 28 dB/pV (25 V/ S/N 20 dB)
Treble; + 12 dB at 10 kHz
: Less than 2 A (tape mode, 0.5 W 4-speaker)
: 4 Q (4 - 8 © acceptable)
: 7" x 1-15/16" x 5-7/8" (178 x 50 x 150 mm)
: 3 lbs. 8 oz. (1.6 kg)
: 87.9 - 107.9 MHz
: 13.2 dBf. (1.25 pV/ 75 Q)
: 15.2 dBf. (1.6 uV/75 Q)
: 80 - 15,000 Hz +3 dB
: 1.5 dB
: 75 dB
: 35 dB at 1,000Hz
: 65 dB
: 100 dB
: 70 dB
: 4-track, 2-program stereo
: 1-7/8"/sec (4.76 cm/sec)
: Less than 110 sec (C-60)
: 35 - 14,000 Hz +3 dB (normal)
35 - 17,000 Hz +3 dB (metal)
: 0.12 % (WRMS)
: 52 dB (Dolby NR on; 62 dB)
"Above specifications comply with ElA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in technology.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol OÙ are trademarks of Dolby Laboratories Licensing Corporation.
CQ-R925EUC
27
Publicité
