Panasonic CQ-R925EUC Manuel D'utilisation page 22

Installation Guide continued
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt ©, using a suitable wrench.
c) Insert the unit into Mounting Collar @ and push it in until "click" is heard.
Mounting Bolt
Unit A
d) Secure the rear of the unit to the car by either of the two recommended methods as follows.
E Using the Rear Support Strap @)
Affix one end of the Rear Support Strap © to the rear of the unit, and the other end to the Fire Wall of Car,
or some other metallic area.
E Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt © on the rear of the unit with Rubber Cushion (Optional), and mount it into the exist-
ing Rear Support Bracket.
Fire Wall of Car
Rear Support Bracket
(4) Tapping Scraw 3 mma {existing on the car)
N Rubber Cushion (Optional)
(5) Mounting Bolt
( Mounting Collar
(D Mounting Collar
3. Plug the Power Connector (6).
ga»
V œ
ak `
era `
+ st "a
| Fe Power Connector
4. After installation reconnect the negative (—) battery terminal.
22
CQ-R925EUC