Panasonic CQ-R925EUC Manuel D'utilisation page 17

Clock Basics
(The clock system is 12-hours.)
Initial Time Setting
@ Press DISP. "AdJ" is displayed.
Press and hold DISP again for more than 2
seconds. "12" blinks indicating the time set-
Tr y —— ting mode is activated.
- Press and hold C
des E E | © To set hours, press "" TUNE?" or "TUNEAN'.
© Press DISP again for minute setting.
©To set minutes, press "WTUNE" or
TUNE".
Hold "A" or "V" to change numbers rapid-
ly.
(E) When you have set the time, press DISP.
Resetting the Time
When you want to reset the time, press and hold DISP for more than 2
seconds to activate the time setting mode. Then, repeat step © to ®©
above.
Selecting the Clock Display
Press DISP for clock display.
Press DISP once again, the current audio display mode resumes.
When power is turned off while the time.is displayed, the clock mode
remains on. When the PWR is pressed again, the system is com-
pletely.
Note: Before you leave your car that has no ACC, be sure to switch
power off.
CQ-R925EUC
17