Publicité
Les langues disponibles
Les langues disponibles
Motor Antenna
lf the stereo unit functions properly with all these
Connect the vehicle motor antenna lead to the blue
connections made, disconnect the wires and pro-
motor antenna relay control lead.
ceed to the final installation.
Battery
Connect the yellow battery lead to the correct radio
U Final Installation
wire or to the battery fuse port on the fuse block.
Lead Connections
Antenna
Connect all wires, making sure that each connec-
Connect the antenna by plugging the antenna lead
tion is insulated and secure. Bundle all loose wires
into the antenna receptacle.
and fasten them with tape so they won't fall down
later. Now insert the stereo unit into the mounting
Equipment
collar.
Connect any optional equipment such as amplifier,
according to the instructions furnished with the
Congratulations!
After making a few final checks,
equipment. Keep about 12 inches (30 cm) of dis-
you're ready to enjoy your new auto stereo system.
tance between the speaker cords/amplifier unit and
the antenna/antenna
extension cord. Read the
operating and installation instructions for any equip-
ment you will connect to this unit.
LJ Final Checks
1. Make sure that all wires are properly connect-
Power
ed and insulated.
Connect the red power lead to the correct vehicle
2. Make sure that the stereo unit is securely held
radio wire or to the appropriate fuse port on the fuse
in the mounting collar.
block.
3. Turn on the ignition to check the unit for prop-
er operation.
lf you have difficulties, consult your nearest autho-
rized professional installer for assistance.
O Installation Procedures
1. Secure the Mounting Collar ©.
Insert Mounting Collar © into the car's dashboard, and bend mounting tabs out with a screwdriver.
Mounting Tab
Dashboard
(a
Screwdriver
21
CQ-R925EUC
Publicité
