Panasonic CQ-R925EUC Manuel D'utilisation page 24

E
N
G
L
|
S
H
24
Installation Guide continued
@ Remove the removabte face plate by pulling on the
right side of the unit. Place the removable face plate
in a supplied case.
Contacts
Security Indicator
The security indicator blinks when the removable face plate is removed from the unit.
Activate Security Indicator
Press and hold SEL for more than 2 seconds when the power is ON. "LEd ON" is displayed, and the security
indicator turns ON.
Display Secrity Indicator
Disappears | Br ]- Blinks
t
(Press and hold SEL for more than 2 seconds.)
Disappears | OFF OFF
Caution:
When you want to remove the unit, the security indicator functions can be canceled by the following steps
of procedure.
e install the removabie face plate.
(4) As shown in Fig.3, insert the removable face plate with the arrow pointing toward the removable face plate
case until you hear a "click". Keep the removable face plate in the case. Then, you can bring the plate
safely.
Removable Face Plate Case
Fig.3
Set two arrows together.
To install the Removable Face Plate
@) Slide the left side of the removable face plate in place
Press the right end of removable face plate until "click" is heard.
Plastic Tab
Fig.4
/
Cutout
Caution: |
1. Before removing the removable face plate, make sure the power is off. |
2. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the removable face plate, while driving your car.
4. Do not place the removable face plate on the dashboard or nearby areas where the temperature rises |
to high levels. j |
5. Do not touch the contacts on the removable face plate or on the main unit. since this may result in poor |
electrical contacts. |
6. If dirt or other foreign substances get on the contacts, wipe them with a clean, dry cloth. |
PP |
CQ-R925EUC