Publicité
Les langues disponibles
Les langues disponibles
• Lift the Mini Lift to approx. mid-height
• The threaded tube no. 8 has a hole which must be lined up with
the inspection hole no. 7
• If the nut is visible through the inspection hole, this is because
it has been damaged. Stop using the Mini Lift and send it to a
specialist for repair. The nut is in good operational order if it is
not visible through the inspection hole.
Scrapping
If the Mini Lift is disposed of:
• The grease coming from the drives or the threaded rods must
be removed in accordance with the standards in force in the
country where it is installed.
• All the metal parts can be recycled; rubber runners must be
removed in accordance with the standards in force in the coun-
try where it is installed.
*Note: Applies only to Part no. 503146
The special feature of this design is that the width of the
supports can be adjusted three times (please use the included
profiles for adjustment):
730 mm, 1130 mm and 1530 mm.
Thus, this car lift can also be used for vehicles with smaller
track width.
– 29 –
Publicité
