Publicité
Les langues disponibles
Les langues disponibles
To Iift the four wheels simultaneously:
The user must first Iift either the front or the rear of the vehicle,
then, once the desired height is reached, tilt the vehicle manually.
This operation must be done in the following way:
• Place two jack stands under the end of the vehicle which has
been raised.
• One operator (or more) raises the vehicle to make it Ievel and
resting on the jack stands.
• Another operator comes and locks the anti-tilt arm and makes
sure the vehicle is stable before the first Operator releases the
Ioad.
• Place two other jack stands at the other end of the vehicle.
Safetynut
The drive nut for the Ioad can wear over time or if it is badly
lubricated. In this case, a safety device holds the Ioad, but it is
no Ionger possible to Iift or lower it. Do not try to repair the Mini
Lift so that you can continue to use it. Only specialists must be
entrusted with the repair.
The operation of this nut can be checked via the inspection hole
no. 7, situated on the tube no. 6. To do this:
– 28 –
Publicité
