Publicité
Les langues disponibles
Les langues disponibles
• Once the Ioad is lifted, it is imperative that the Ioad is locked
by means of the anti-tilt arm.• It is forbidden to work under the
vehicle without having first positioned it on jack stands.
• The anti-tilt arm gives additional safety, but does not remove
the need to use jack stands.
• Use a hard, Ievel non-slippery surface, suitable for supporting
the Ioad.
• Check that the Ioad is stable on the jack. Make sure that there
is no risk of it tilting or slipping.
• Do not try to move the Ioad when it is resting on the jack.
• Never use a damaged or worn jack.
• Do not modify this item.
• Do not drive onto this jack.
• This jack is exclusively designed for Iifting cars. Any other use is
forbidden.
• While Iifting or lowering a car, do not allow anyone other than
the operator to approach the vehicle.
Follow the drill's instructions for use. In particular, because of the
risks presented by the electrical supply, do not use where water is
present.
We advise the use of a class II drill. Otherwise, install a 30 mA
differential circuit breaker on its supply.
When Iifting or lowering, it is forbidden to keep the vehicle
balanced on the Mini Lift. You must Iet the vehicle rest freely on
the front or rear wheels. The procedure for having the 4 wheels
lifted is described in the section „tilting". Non-respect of these
recommendations may cause damage to property and people.
– 17 –
Publicité
