Limora Autolift Mode D'emploi page 21

and the lowest position. Also the Ioad limiting hexagon bit is going
to break if the user overrides the stops by continuing to operate
the drill.
Before reaching the end of the Iift, it is therefore necessary to
gradually slow the movement and to stop it before reaching the
stop. Never override the stops.
Do not try to use the Mini Lift with a hexagon bit different to the
one supplied originally.
Capacity
When Iifting the vehicle, do not try to raise the 4 wheels
simultaneously, but Iet it rest freely on the front or rear wheels.
Once the vehicle is lifted, the maximum static capacity is
– 21 –