Publicité
Les langues disponibles
Les langues disponibles
Lowering
• Loosen the anti-tilt arm Ieeking mechanism. If you forget this
mechanism, this can Iead to damage to the Mini Lift.
• Operate the Mini Lift using the drill (or the crank), changing the
direction of rotation.
• Lower the Mini Lift until the Ioad is no Ionger resting on it and it
can easily be removed from the side.
• Before reaching the minimum height, gradually slow the
lowering speed.
Tiliting
Only for working on the front or the rear of the vehicle:
If the vehicle's centre of gravity is aligned with the axis of the Mini
Lift, it can tend to tilt either forward or back. To avoid this, it is
imperative to use jack stands and the safety arm. In addition, it
is recommended that the axis of the Mini Lift is moved from the
vehicle's axis of gravity, in order to place more Ioad on the wheels
that remain on the ground.
If one end of the vehicle is raised and the user wishes to work
on the other end, you must lower it and then Iift it again having
changed the position of the Mini Lift to change the distribution of
the Ioad and Iift the desired end.
– 27 –
Publicité
