Publicité
Les langues disponibles
Les langues disponibles
10.2 Add up "Weight"
Place weight on weighing plate.
The display value is added to the summation memory by pressing the
The [ ] display next to "M+" indicates the stored value. After dead stop control was
carried out the balance will return automatically to counting mode.
Place goods to be weighed for second weighing and add to memory.
Repeat sequence of operations, as required. Please note that the balance must be
unloaded between the individual weighing procedures.
This process can be repeated 99 times or until the weighing range of the balance is
exhausted.
Display of you saved weighing data:
With balance unloaded, press the
The total weight as well as the number or weighings will pop up for 3 sec.
Total weight placed on
balance
Note:
Turning off the balance will result in a loss of all stored values.
10.3 Delete stored values
Unload balance and press the
pieces and number of weighings will be set to zero. The [ ] display next to "M+"
disappears.
38
key:
Number weighing
processes
button. Stored values, total weight, total number of
button.
CXB-BA-e-2124
Publicité
