KERN CXB 30K2 Mode D'emploi page 85

8.5 Count with tolerance control - Fill to target
This function can be used to program a target number of pieces or target weight.
Reaching the target value is indicated by an audio-visual signal.
8.5.1 Set tolerance value for target number of pieces
Reaching the target value will be indicated by an audio signal and [-QtY-] will be
flashing in the reference window.
Press button
Press button
Use number keys to enter desired target number of pieces
Press button
Press button
Erase tolerance value:

When entering the target weight, enter value „0"
CXB-BA-e-2124
Entered target value.
Corrections possible by
pressing button
31