Sportplus SP-HT-9800-iE Mode D'emploi page 18

5. ASSEMBLY INSTRUCTIONS
STEP 4
8
9
33L
1. Install the left and right pedals (33L & 33R) to the left and right pedal cranks (30L & 30R).
2. Attach the handlebar (69) to the handlebar post (63). Secure with the tube spacer (8) and
T-shaped round head grooved pin (9). Tighten fully.
3. Guide the hand pulse cable (67) through the hole located above the mounting plate of the
handlebar post (63), and pull it up into a vertical position. See detailed image.
SP-HT-9800-iE-IM-DE+GB+FR-04.indb 34-35
67 63
69
63
33R
34
5. ASSEMBLY INSTRUCTIONS
STEP 5
1
3
63
1. Loosen the 4 screws (3) on the back of the computer (1).
2. Connect the upper computer cable (14) and the hand pulse cable (67) to the sockets on
the back of the computer (1).
3. Place the computer (1) on the computer mount. Secure the computer with the 4 screws (3)
removed earlier.
35
10/6/2016 2:30 PM