SilverCrest SLL 16 C1 Mode D'emploi Et Consignes De Sécurité page 22

SilverCrest SLL 16 C1
9.3.2 Deactivate TWS mode
•
Briefly press
beep, the TWS LED (10) will switch off on both speakers.
•
Playback will now continue through the main speaker only.
•
You can reactivate TWS mode by briefly pressing the
on both speakers to restart TWS coupling mode.
9.4 AUX IN mode
You can listen to music from a portable audio device connected to the
3.5 mm jack cable (C).
Use the supplied 3.5 mm jack cable (C) for AUX IN mode.
Once a 3.5 mm jack plug is inserted into the AUX IN jack (7)
of the speaker when the device is switched on, it will
automatically switch to the AUX IN input. At this point, any
active Bluetooth
playback will continue via the AUX IN input.
Tracks cannot be skipped using the
in AUX IN mode.
•
Briefly press the on/off button
beep will sound and the power/charging LED (11) will light up
blue. Open the appliance lid (9).
•
Connect the audio device to the AUX IN jack of the speaker. Use
the supplied 3.5 mm jack cable (C).
20 - English
(6) on any speaker to disable TWS mode. After a
®
connection will be interrupted and
(3) and
(1) to switch the speaker on. A
(6) button
(2) buttons