SilverCrest SLL 16 C1 Mode D'emploi Et Consignes De Sécurité page 17

The integrated battery must be fully charged before using the speaker
for the first time. Proceed as follows:
•
Open the appliance lid (9) on the back of the speaker.
•
Connect the USB A plug of the charging cable (B) to a suitable USB
mains adapter.
•
Connect the Micro USB connector of the charging cable (B) to the
Micro USB charging socket (8) of the speaker. The power/charging
LED (11) lights up green while charging and then lights up green
when charging is complete.
•
Disconnect the USB charging cable (B) from the speaker after
charging and close the appliance lid (9).
A low battery level will be indicated as follows:
A series of beeps will sound and the power/charging LED
(11) will briefly light up red. Then, the power/charging LED
(11) will display the current operating mode again.
This process is repeated in increasingly shorter intervals until
the battery is depleted. The speaker will then switch off
automatically.
SilverCrest SLL 16 C1
English - 15