Maytag MHW4200BW2 Guide D'utilisation Et D'entretien page 9

CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best
fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.
NOTES:
Not all cycles, temperatures, options, or spin speeds are available on all models.
n
All wash temperature selections feature a cold rinse.
n
Not all temperatures, spin speeds, or soil levels are labeled on the control panel.
n
Items to wash
Cycle:
using default
cycle settings:
Wet load of clothes
& Spin
Swimwear, items that
need rinsing
& Spin
Extra Rinse
Clothing, bedding Sanitize
and towels requiring
sanitization
Allergen
Sturdy garments
and household items
exposed to possible
allergens
Heavily soiled fabrics
Power
Wash
* Steam for Stains option is only available when warm, hot, or extra hot water temperature is selected.
† Sanitize
n This washer has a Sanitize Cycle that eliminates 99.9% of bacteria typically found on clothing, bedding, and towels, based on independent,
third-party laboratory testing. There is no carryover of bacteria between loads after the cycle is complete.
n Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-hot water temperature to help ensure the removal
of heavy soils and stains. It is recommended that you set your hot water heater to 120°F (49°C) to ensure proper performance during this
cycle.
†† Allergen
Allergen cycle certified by NSF International, an independent, third party testing and certification organization. The certification verified that this
cycle reduced tested allergens by at least 95.0% and maintained the water temperature necessary to kill dust mites. Only the allergen cycle
has been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness. It is recommended that
you set your hot water heater to 120°F (49°C) to ensure proper performance during this cycle.
8
Wash
Temperature:
Drain N/A
Extra Hot
Drain
Hot
with Warm
Cool
Cold
Extra Hot
†
†† Extra Hot
Hot
Extra Hot
Hot
Warm
Cool
Cold
Soil
Spin
Level:
Speed:
Extra High N/A
Med
Low
Extra Heavy
Extra High
Med
Med
Light
Low
Extra High Extra Heavy Steam for Stains*
Med Med
Low Light
Extra Heavy Steam for Stains*
Extra High
Med Med
Light
Extra High Extra Heavy Steam for Stains*
Med Med
Low Light
Cycle Details:
Available
Options:
Fresh Spin Use Drain & Spin to remove excess
™
Delay Start water from the load. Spin speed can
be set to a lower setting.
Fresh Spin Select Drain & Spin; then select
™
Extra Rinse to add water. The
Delay Start
cycle includes an extra-high-speed
spin. For some fabrics, you may
wish to set the spin speed to a
lower setting.
Using the highest wash temperature
Fresh Spin
™ available ensures sanitization.
Extra Rinse Check recommended wash
Delay Start temperature of your items.
Uses more water to flush out
Fresh Spin allergens such as dust mites
™
Extra Rinse
and pet dander from normally-
Delay Start soiled items.
Use this cycle for extremely soiled
Fresh Spin garments and household items that
™
Extra Rinse need additional cleaning power. This
Delay Start cycle combines high-speed wash
action, extra-high-speed spin, and a
deep rinse to flush excess dirt from
the load.