KTM A46010917000C1 Instructions De Montage page 27

–
Clean, grease, and mount spacing tube
Long-life grease ( p. 13)
–
9
Position spacer washer
Info
The spacer disk is not present on all models.
–
bl
Press new bearing all the way in from the outside to the inside.
Guideline
Only press the bearing in via the outer bearing race, otherwise the bearing will be damaged when it is
pressed in.
–
Grease radial shaft seal ring
7
.
.
2
(included) and press in until flush.
ASSEMBLY 5
504068-01
504069-01
11