Publicité
Les langues disponibles
Les langues disponibles
NOTE
►
If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little. When doing so, hold the
blade holder
together with the blender
jug
and the base
come apart.
ATTENTION! DAMAGE TO PROPERTY!
►
Do not operate the appliance for longer than
1 minute in one session. The appliance will
overheat! After using for 1 minute, allow the
appliance to cool down completely.
8) When the smoothie is ready, turn the blade
holder
until the arrow on the base
to the
symbol on the blade holder
remove the blade holder
blender jug
.
9) Turn the blender jug
blade holder
.
10) Screw the lid
off the blender jug
can drink the smoothie through the drinking
opening on the lid
You can now prepare a second smoothie using
the second blender jug
Cleaning and care
DANGER – ELECTRIC SHOCK!
►
Before cleaning the appliance, disconnect
the plug from the mains power socket!
Risk of electric shock!
NEVER submerse the base
other fluids!
■
It is best to clean the appliance directly after use.
This makes food residues easier to remove.
ATTENTION! DAMAGE TO PROPERTY!
►
Do not use abrasive or aggressive cleaning
materials. These could damage the surface
of the appliance!
GB │ IE │ NI
■
6
│
so that they do not
points
and
with the attached
over and unscrew the
. You
.
.
in water or
■
Wipe the base
with a moist cloth. For stubborn
soiling use a mild detergent on the cloth.
Wipe off any detergent residue with a cloth
moistened with clean water.
■
Dismantle the blade holder
it thoroughly:
–
Press on the underside of the blade holder
against the small grey plate
trudes through the blade holder
–
You can now remove the sealing ring
and the plastic ring
holder
.
■
Clean the blender jug
with blade
, the sealing ring
plastic ring
and lid
washing-up liquid. Afterwards, rinse all parts
with clean water so that no detergent residues
remain.
in order to clean
which pro-
.
from the blade
, the blade holder
and the
in warm with a mild
SSM 180 A2
Publicité
