Dogtra T&B DUAL Manuel Du Propriétaire page 7

2. Transmitter Button Function
1) Beeper Setting
Setting). The Beeper Setting offers Nick/Constant,
Beeper Mode, and Pitch Setting functions.
2nd Dog
Nick/
Constant
Beeper
Mode
Pitch
Setting
12
The transmitter for the
T&B DUAL has seven
buttons (three on the face
of the transmitter, three on
the left side, and one on
the right). You can use the
Setting Toggle Switch on
the back of the transmitter
to change from T (Training
Setting) to B (Beeper
1st Dog
Nick/
Constant
Beeper
Mode
Pitch
Setting
Nick/Constant Button
There are three buttons each on the front and left side
of the transmitter. The Nick/Constant button is the top
button on each side of the transmitter. When the button
is pressed quickly, the Nick function is activated and the
receiver emits a single rapid pulse of electrical stimulation.
When the button is pressed more than two seconds, the
Constant function is activated and the receiver emits a
continuous stimulation as long as the button is pressed,
for up to 12 seconds. If the button is not released after 12
seconds, the stimulation will automatically turn off as a
safety feature. The receiver will be ready to be reactivated
once the button has been released.
Button not pressed Button pressed
(1 second)
Button pressed
(2-12 seconds)
13